PriceList for Tinuvin 1130 - Alkyl Polyglucoside (APG) 0810 – DEBORN

Introduction: APG is a new kind nonionic surfactant with comprehensive nature, which is directly compounded by renewable natural glucose and fatty alcohol. It has characteristic of both common nonionic and anionic surfactant with high surface activity, good ecological security and intermiscibility. Almost no surfactant can compare favorably with APG in terms of ecological security, irritation and toxicity. It is internationally recognized as the preferred “green” functional surfactant.

Product name: APG 0810

Synonyms: Decyl Glucoside

CAS NO.: 68515-73-1

Technical index:

Appearance, 25℃: Light yellow liquid

Solid Content %: 50-50.2

PH Value (10% aq.): 11.5-12.5

Viscosity (20℃, mPa.s): 200-600

Free Fatty Alcohol (wt %): 1 max

Inorganic salt (wt %): 3 max

Color（Hazen）: ＜50

Application:

1.No irritation to eyes with good softness to skin, it can be widely used in personal care and household cleaning products formula, such as shampoo, bath liquid, cleanser, hand sanitizer, day cream, night cream, body cream & lotion and hand cream etc. It is also a good foaming agent for children blowing bubbles 

2.It has good solubility, permeability and compatibility in strong acid, strong alkali and electrolyte solution, with non-corrosive effect of various materials. It causes no flaw after washing and does not cause stress cracking of plastic products. It is suitable for household cleaning, industry hard surface cleaning, refining agent with good Resistance of high temperature and strong alkali for textile industry, oil adopts the foaming agent for oil exploitation and pesticide adjuvant.

Packing: 50/200/220KG/drum or as customers require.

Storage: Expiration date is 12 months with original package. The storage temperature is preferably in the range of 0 to 45℃.If store a long time at  45℃ or more, the color of products will gradually become darker. When products were stored at room temperature, there will be a small amount of solid precipitation or appearance of turbidity which is due to a small amount of Ca2、Ma2（≤500ppm） at high PHs, but this will have no negative impacts on the properties. With lower PH value down to 9 or less, the products can become clear and transparent.